dmesg - ACPI CPUfreq - Conservative

Return To ACPI CPUfreq - Conservative System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.15.0-999-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201405130205 SMP Tue May 13 06:06:25 UTC 2014
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007a5d5fff] usable
BIOS-e820: [mem 0x000000007a5d6000-0x000000007a605fff] reserved
BIOS-e820: [mem 0x000000007a606000-0x000000007a739fff] usable
BIOS-e820: [mem 0x000000007a73a000-0x000000007a92cfff] ACPI NVS
BIOS-e820: [mem 0x000000007a92d000-0x000000007b58ffff] reserved
BIOS-e820: [mem 0x000000007b590000-0x000000007b590fff] usable
BIOS-e820: [mem 0x000000007b591000-0x000000007b616fff] ACPI NVS
BIOS-e820: [mem 0x000000007b617000-0x000000007ba60fff] usable
BIOS-e820: [mem 0x000000007ba61000-0x000000007bff2fff] reserved
BIOS-e820: [mem 0x000000007bff3000-0x000000007bffffff] usable
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7738/X79MA-GD45 (MS-7738), BIOS V3.3 07/23/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask 3FFE00000000 write-back
  1 base 000200000000 mask 3FFF80000000 write-back
  2 base 00007E000000 mask 3FFFFE000000 uncachable
  3 base 000080000000 mask 3FFF80000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 2GB, type WB
reg 2, base: 2016MB, range: 32MB, type UC
reg 3, base: 2GB, range: 2GB, type UC
total RAM covered: 8160M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2016MB, range: 32MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 2GB, type WB
e820: update [mem 0x7e000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd900-0x000fd90f] mapped at [ffff8800000fd900]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
 [mem 0x27fe00000-0x27fffffff] page 1G
init_memory_mapping: [mem 0x27c000000-0x27fdfffff]
 [mem 0x27c000000-0x27fdfffff] page 1G
init_memory_mapping: [mem 0x200000000-0x27bffffff]
 [mem 0x200000000-0x27bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x7a5d5fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x7a3fffff] page 2M
 [mem 0x7a400000-0x7a5d5fff] page 4k
init_memory_mapping: [mem 0x7a606000-0x7a739fff]
 [mem 0x7a606000-0x7a739fff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x7b590000-0x7b590fff]
 [mem 0x7b590000-0x7b590fff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0x7b617000-0x7ba60fff]
 [mem 0x7b617000-0x7b7fffff] page 4k
 [mem 0x7b800000-0x7b9fffff] page 2M
 [mem 0x7ba00000-0x7ba60fff] page 4k
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x7bff3000-0x7bffffff]
 [mem 0x7bff3000-0x7bffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
 [mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35c90000-0x36e3ffff]
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007A84D080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000007A855BC8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000007A84D190 008A38 (v02 ALASKA A M I    00000017 INTL 20051117)
ACPI: FACS 0x000000007A924080 000040
ACPI: APIC 0x000000007A855CD8 000100 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000007A855DD8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000007A855E20 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 0x000000007A855E60 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x000000007A855E98 0CD128 (v02 INTEL  CpuPm    00004000 INTL 20051117)
ACPI: EINJ 0x000000007A922FC0 000130 (v01 AMI    AMI EINJ 00000000      00000000)
ACPI: ERST 0x000000007A9230F0 000230 (v01 AMIER  AMI ERST 00000000      00000000)
ACPI: HEST 0x000000007A923320 0000A8 (v01 AMI    AMI HEST 00000000      00000000)
ACPI: BERT 0x000000007A9233C8 000030 (v01 AMI    AMI BERT 00000000      00000000)
ACPI: DMAR 0x000000007A9233F8 0000B4 (v01 A M I  OEMDMAR  00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x00000000-0x27fffffff]
  NODE_DATA [mem 0x27fff7000-0x27fffbfff]
 [ffffea0000000000-ffffea0009ffffff] PMD -> [ffff880277600000-ffff88027f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x27fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0x7a5d5fff]
  node   0: [mem 0x7a606000-0x7a739fff]
  node   0: [mem 0x7b590000-0x7b590fff]
  node   0: [mem 0x7b617000-0x7ba60fff]
  node   0: [mem 0x7bff3000-0x7bffffff]
  node   0: [mem 0x100000000-0x27fffffff]
On node 0 totalpages: 2075391
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 7790 pages used for memmap
  DMA32 zone: 498530 pages, LIFO batch:31
  Normal zone: 24576 pages used for memmap
  Normal zone: 1572864 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7a5d6000-0x7a605fff]
PM: Registered nosave memory: [mem 0x7a73a000-0x7a92cfff]
PM: Registered nosave memory: [mem 0x7a92d000-0x7b58ffff]
PM: Registered nosave memory: [mem 0x7b591000-0x7b616fff]
PM: Registered nosave memory: [mem 0x7ba61000-0x7bff2fff]
PM: Registered nosave memory: [mem 0x7c000000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88027fc00000 s86656 r8192 d23936 u131072
pcpu-alloc: s86656 r8192 d23936 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2042940
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8068276K/8301564K available (7664K kernel code, 1147K rwdata, 3624K rodata, 1356K init, 1432K bss, 233288K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-11.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS:16640 nr_irqs:1184 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3599.760 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.52 BogoMIPS (lpj=14399040)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140214
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff81e73000 - ffffffff81e7a000)
ftrace: allocating 31836 entries in 125 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000f4ffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr f4ffc000 ver 1:0 cap d2078c106f0466 ecap f020de
dmar: RMRR base: 0x0000007b48f000 end: 0x0000007b49efff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000f4ffc000 proximity domain: 0x0
IOAPIC id 0 under DRHD base  0xf4ffc000 IOMMU 0
IOAPIC id 2 under DRHD base  0xf4ffc000 IOMMU 0
HPET id 0 under DRHD base 0xf4ffc000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4960X CPU @ 3.60GHz (fam: 06, model: 3e, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 35000173127968 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (86394.24 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7a73a000-0x7a92cfff] (2043904 bytes)
PM: Registering ACPI NVS region [mem 0x7b591000-0x7b616fff] (548864 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 22:09:16, date: 05/14/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f 
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xffffffff]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xf4f09000-0xf4f09fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf4f08000-0xf4f0800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf4f07000-0xf4f073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf4f00000-0xf4f03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf4f06000-0xf4f063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf4f05000-0xf4f057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf4f04000-0xf4f040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1002:9440] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xf4e20000-0xf4e2ffff 64bit]
pci 0000:02:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x30: [mem 0xf4e00000-0xf4e1ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa30] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xf4e30000-0xf4e33fff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xf4e00000-0xf4efffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xf4d00000-0xf4d01fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0:   bridge window [mem 0xf4d00000-0xf4dfffff]
pci 0000:06:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xf4c00000-0xf4c01fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1:   bridge window [mem 0xf4c00000-0xf4cfffff]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:07:00.0: reg 0x18: [mem 0xf4b04000-0xf4b04fff 64bit pref]
pci 0000:07:00.0: reg 0x20: [mem 0xf4b00000-0xf4b03fff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.5:   bridge window [mem 0xf4b00000-0xf4bfffff]
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x90000000-0xffffffff] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7a5d6000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a73a000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b591000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7ba61000-0x7bffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf4fff000-0xf4ffffff] has been reserved
system 00:00: [mem 0xfbfff000-0xfbffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xf4ffc000-0xf4ffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: [io  0x0400-0x0453] could not be reserved
system 00:09: [io  0x0458-0x047f] has been reserved
system 00:09: [io  0x1180-0x119f] has been reserved
system 00:09: [io  0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0a: [io  0x0454-0x0457] has been reserved
system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xf4e00000-0xf4efffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0:   bridge window [mem 0xf4d00000-0xf4dfffff]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1:   bridge window [mem 0xf4c00000-0xf4cfffff]
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.5:   bridge window [mem 0xf4b00000-0xf4bfffff]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x90000000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf4e00000-0xf4efffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xf4d00000-0xf4dfffff]
pci_bus 0000:06: resource 1 [mem 0xf4c00000-0xf4cfffff]
pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xf4b00000-0xf4bfffff]
pci_bus 0000:08: resource 4 [io  0x0000-0x03af]
pci_bus 0000:08: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:08: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:08: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:08: resource 10 [mem 0x90000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18112K (ffff880035c90000 - ffff880036e40000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x765d6000-0x7a5d6000] (64MB) mapped at [ffff8800765d6000-ffff88007a5d5fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1400105356.588:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 15793
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90010f80000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf4f07000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.15.0-999-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf4f06000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.15.0-999-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: irq 65 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 72 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.15.0-999-generic xhci_hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.15.0-999-generic xhci_hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 80 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.15.0-999-generic xhci_hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.15.0-999-generic xhci_hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 8eeb582eb1e198af2e54cf0f9df4fc79a7e66f29'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
  Magic number: 14:994:198
rtc_cmos 00:05: setting system clock to 2014-05-14 22:09:24 UTC (1400105364)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1356K (ffffffff81d20000 - ffffffff81e73000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 516K (ffff88000177f000 - ffff880001800000)
Freeing unused kernel memory: 472K (ffff880001b8a000 - ffff880001c00000)
systemd-udevd[178]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:00:1f.2: version 3.0
r8169 0000:07:00.0: irq 81 for MSI/MSI-X
ahci 0000:00:1f.2: irq 82 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems apst 
r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0xffffc90010f78000, d4:3d:7e:b4:89:f7, XID 0c900800 IRQ 81
r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xf4f05000 port 0xf4f05180 irq 82
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: ST1000DX001-1CM162, CC43, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      ST1000DX001-1CM1 CC43 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 93 bits of entropy available
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
init: plymouth-upstart-bridge main process (268) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (279) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (281) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (282) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (284) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (286) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (271) terminated with status 5
usb 5-1: new full-speed USB device number 2 using xhci_hcd
Adding 8299516k swap on /dev/sda5.  Priority:-1 extents:1 across:8299516k FS
usb 5-1: New USB device found, idVendor=046d, idProduct=c223
usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-1: Product: G15 Keyboard Hub
usb 5-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
systemd-udevd[393]: starting version 204
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
usb 5-2: new high-speed USB device number 3 using xhci_hcd
lp0: using parport0 (polling).
wmi: Mapper loaded
random: nonblocking pool is initialized
usb 5-2: New USB device found, idVendor=1a40, idProduct=0101
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB 2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
EDAC MC: Ver: 3.0.0
mei_me 0000:00:16.0: irq 83 for MSI/MSI-X
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
EDAC sbridge: Seeking for: dev 1c.0 PCI ID 8086:0e60
EDAC sbridge: Seeking for: dev 1d.2 PCI ID 8086:0e6a
EDAC sbridge: Seeking for: dev 1d.3 PCI ID 8086:0e6b
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:0eb8
EDAC sbridge: Seeking for: dev 11.4 PCI ID 8086:0ebc
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
microcode: CPU0 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU1 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU2 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU3 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU4 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU5 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU6 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU7 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU8 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU9 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU10 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU11 sig=0x306e4, pf=0x4, revision=0x416
microcode: Microcode Update Driver: v2.00 , Peter Oruba
usb 1-1.6: new full-speed USB device number 3 using ehci-pci
[drm] Initialized drm 1.1.0 20060810
AVX version of gcm_enc/dec engaged.
snd_hda_intel 0000:00:1b.0: irq 84 for MSI/MSI-X
snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:02:00.1: irq 85 for MSI/MSI-X
audit: type=1400 audit(1400105365.823:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=544 comm="apparmor_parser"
audit: type=1400 audit(1400105365.823:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=544 comm="apparmor_parser"
audit: type=1400 audit(1400105365.823:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
audit: type=1400 audit(1400105365.823:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=544 comm="apparmor_parser"
audit: type=1400 audit(1400105365.823:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
audit: type=1400 audit(1400105365.823:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input5
[drm] radeon kernel modesetting enabled.
checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    dig-out=0x1e/0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Front Mic=0x19
sound hdaudioC0D0:      Rear Mic=0x18
sound hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
usb 1-1.6: New USB device found, idVendor=0403, idProduct=6001
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: FT232R USB UART
usb 1-1.6: Manufacturer: FTDI
usb 1-1.6: SerialNumber: A800fq8V
Console: switching to colour dummy device 80x25
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
[drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x174B:0x0502).
[drm] register mmio base: 0xF4E20000
[drm] register mmio size: 65536
ATOM BIOS: Wekiva
radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:02:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone  kernel: Available graphics memory: 4044380 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading RV770 Microcode
usb 5-1.1: new low-speed USB device number 4 using xhci_hcd
usbcore: registered new interface driver ftdi_sio
ftdi_sio 1-1.6:1.0: FTDI USB Serial Device converter detected
usb 1-1.6: Detected FT232RL
usb 1-1.6: Number of endpoints 2
usb 1-1.6: Endpoint 1 MaxPacketSize 64
usb 1-1.6: Endpoint 2 MaxPacketSize 64
usb 1-1.6: Setting MaxPacketSize 64
usb 1-1.6: FTDI USB Serial Device converter now attached to ttyUSB0
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880271216c00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880271216c0c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: irq 86 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I-1
[drm]   HPD2
[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm]   DIN-1
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I-2
[drm]   HPD1
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
usb 5-1.1: New USB device found, idVendor=046d, idProduct=c226
usb 5-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-1.1: Product: G15 Gaming Keyboard
usb 5-1.1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
usb 5-1.1: ep 0x82 - rounding interval to 128 microframes, ep desc says 192 microframes
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1400105366.071:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=733 comm="apparmor_parser"
audit: type=1400 audit(1400105366.071:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=733 comm="apparmor_parser"
audit: type=1400 audit(1400105366.071:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=733 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: failsafe main process (691) killed by TERM signal
[drm] fb mappable at 0xE0241000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
init: cups main process (753) killed by HUP signal
init: cups main process ended, respawning
audit: type=1400 audit(1400105366.143:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=849 comm="apparmor_parser"
usb 5-1.4: new full-speed USB device number 5 using xhci_hcd
usb 5-1.4: New USB device found, idVendor=046d, idProduct=c227
usb 5-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-1.4: Product: G15 GamePanel LCD
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb5/5-1/5-1.1/5-1.1:1.0/0003:046D:C226.0001/input/input14
hid-generic 0003:046D:C226.0001: input,hidraw0: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:06:00.0-1.1/input0
Console: switching to colour frame buffer device 240x67
radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:02:00.0: registered panic notifier
[drm] Initialized radeon 2.38.0 20080528 for 0000:02:00.0 on minor 0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb5/5-1/5-1.1/5-1.1:1.1/0003:046D:C226.0002/input/input15
hid-generic 0003:046D:C226.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:06:00.0-1.1/input1
r8169 0000:07:00.0 eth0: link down
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:046D:C227.0003/input/input16
hid-generic 0003:046D:C227.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:06:00.0-1.4/input0
usb 5-2.1: new low-speed USB device number 6 using xhci_hcd
usb 5-2.1: New USB device found, idVendor=04f2, idProduct=0833
usb 5-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2.1: Product: USB Keyboard
usb 5-2.1: Manufacturer: CHICONY
usb 5-2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-2.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb5/5-2/5-2.1/5-2.1:1.0/0003:04F2:0833.0004/input/input17
hid-generic 0003:04F2:0833.0004: input,hidraw3: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:06:00.0-2.1/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb5/5-2/5-2.1/5-2.1:1.1/0003:04F2:0833.0005/input/input18
hid-generic 0003:04F2:0833.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:06:00.0-2.1/input1
usb 5-2.2: new full-speed USB device number 7 using xhci_hcd
usb 5-2.2: New USB device found, idVendor=1532, idProduct=000c
usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2.2: Product: Razer Lachesis
usb 5-2.2: Manufacturer: Razer
input: Razer Razer Lachesis as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb5/5-2/5-2.2/5-2.2:1.0/0003:1532:000C.0006/input/input19
hid-generic 0003:1532:000C.0006: input,hidraw5: USB HID v1.00 Mouse [Razer Razer Lachesis] on usb-0000:06:00.0-2.2/input0
input: Razer Razer Lachesis as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb5/5-2/5-2.2/5-2.2:1.1/0003:1532:000C.0007/input/input20
hid-generic 0003:1532:000C.0007: input,hidraw6: USB HID v1.00 Keyboard [Razer Razer Lachesis] on usb-0000:06:00.0-2.2/input1
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1184) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
r8169 0000:07:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
audit_printk_skb: 150 callbacks suppressed
audit: type=1400 audit(1400105396.121:62): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2423 comm="apparmor_parser"
audit: type=1400 audit(1400105396.121:63): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2423 comm="apparmor_parser"
audit: type=1400 audit(1400105396.121:64): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2423 comm="apparmor_parser"
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD

Return To ACPI CPUfreq - Conservative System Information